BALLISTIC TP

$274.99

Clear
SKU: KGTP75 Categories: ,
Share this product

Description

SPEC DECK
MODEL#/ SKU:Series NameKick PointBalance PointTypeFlex CodeFlex (Equivalent)Torque ±0.5°Tip Dia. ±0.05mmTip/Pal ±0.5″Butt Dia. ±0.12mmButt/Pal ±0.5″Length ±0.1″Weight ±2gFrequency ±5cpmMaterials
KGTP75-D50KEVLAR BALLISTIC TP DRMID54.00%TP DRD502X2.7°8.50mm3.00″15.90mm6.00″46″76g300cpm40T.30T, Kevlar, 3K Fiber
KGTP75-D40KEVLAR BALLISTIC TP DRMID54.00%TP DRD40X2.9°8.50mm3.00″15.80mm6.00″46″76g280cpm40T.30T, Kevlar, 3K Fiber
KGTP75-D30KEVLAR BALLISTIC TP DRMID54.00%TP DRD30S3.1°8.50mm3.00″15.70mm6.00″46″74g265cpm40T.30T, Kevlar, 3K Fiber

1. FREQUENCY Measurement Array Parameters: 4.5″ clamp as follows:

ShaftClub LengthHead Mass Estimate:Shaft LengthChuck WT.Insert Depth
Driver45.00″+/-1.50″200g +/-5g46.00″205g1.00″

Fitting

MODEL#/ SKU:Flex Code (FLEX)Low RangeDRIVER SwingSpeed Fit Baseline +/- 6MPHHigh Range
KGTP75-D50D50(2X)123+mph129mph+++mph
KGTP75-D40D40(X)113mph119mph125mph
KGTP75-D30D30(S)105mph110mph115mph
KEVLAR BALLISTIC TOUR SERIES MODEL#KGTP75-D

Elastically Tailored Composites
PURE KINETIC ENERGY
Wound…Round…Epic…

Wound for an explosive transfer of kinetic energy….
however you drive it, KINETIXX® IMRT will optimize down range distance and target performance.

An active shaft that increases in frequency the greater the force applied.

This hard kicking, elastically tailored composite is engineered to improve club forgiveness and

generate outrageous ball speed and precise shot control!

Technology/Design

Filament wound Vacuum Cured Construction technology produces round, pre-loaded concentric and spineless golf shafts for incomparable stability, dynamic response and feedback.

Kevlar Green Ballistic Tour series is Designed for strong players, desiring optimum control and a lower more penetrating Ballistic shot trajectory.

Tension tailored for torsional recovery and attenuation of vibration, for the purest kinetic energy transfer from shaft to clubhead.

PADERSON® KINETIXX® loaded kevlar BALLISTIC series features the worlds only continuous fiber filament wound kevlar construction technology.

Optimizing the extraordinary material properties of Kevlar to create shafts with an incredibly high tensile strength-to-weight ratio; 5x stronger than steel, with 20x the elastic strength.

KGTP75-D is a Mid Balance, Mid kick point advanced composite shaft pre-loaded with a visible fiber structural grid Engineered according to each flex, for balanced strength and stability from butt to tip, without compromising feel, producing Ballistic trajectory.

Installation Guidelines

Installation Guidelines PADERSON KINETIXX LOADED shafts:

Installation should only be completed by a qualified, trained club builder.

  1. All PADERSON KINETIXx loaded shafts are to be BUTT Cut to length only.
  2. Do not TIP trim any shaft model! Regardless of CPM, or club assembly config.
  3. Please do not Chamfer the tips however light belt abrasion is recommended.
    *Tip preparation: light belt abrasion or hand sanding recommended prior to final assembly.
    *To ensure a smooth and clean build, we perform a post-production tip preparation: 1″ Metalwoods, 1.25″ Irons. depending on hosel bore depth, there will in many assemblies be the need to lightly sand beyond the prepared surface delivered. Light belt abrasion is also recommended to insure a full shaft insert and adequate epoxy adhesion. Do not Chamfer tip section or blade prep (scratch) tip to prepare for epoxy.

Reviews

There are no reviews yet.

Be the first to review “BALLISTIC TP”

Your email address will not be published. Required fields are marked *

18 + 17 =

Solve : *
22 − 17 =