Ballistic90 HUT

$124.99

Clear
SKU: KG90 Categories: ,
Share this product

Description

SPEC DECK
MODEL#/ SKU:Series NameKick PointBalance PointTypeFlex CodeFlex (Equivalent)Torque ±0.5°Tip Dia. ±0.05mmTip/Pal ±0.5″Butt Dia. ±0.12mmButt/Pal ±0.5″Length ±0.1″Weight ±2gFrequency ±5cpmMaterials
KG90-HUT40KEVLAR BALLISTIC 90g HUTLOW53.00%HYBRID/UTHUT40X4.2°9.40mm5.00″15.40mm11.50″42″89g285cpm40T.30T, Kevlar, 3K Fiber
KG90-HUT30KEVLAR BALLISTIC 90g HUTLOW52.00%HYBRID/UTHUT30S4.2°9.40mm5.00″15.30mm11.50″42″87g275cpm40T,30T, 5T Amorphous
KG90-HUT20KEVLAR BALLISTIC 90g HUTLOW52.00%HYBRID/UTHUT20R4.2°9.40mm5.00″15.20mm11.50″42″85g265cpm40T.30T, Kevlar, 3K Fiber

1. FREQUENCY Measurement Array Parameters: 4.5″ clamp as folLOWs:

ShaftClub LengthHead Mass Estimate:Shaft LengthChuck WT.Insert Depth
Hybrid41.00″+/-1.0″225g +/-5g42.00″230g1.00″

Fitting

MODEL#/ SKU:Flex Code (FLEX)Low RangeDRIVER SwingSpeed Fit Baseline +/- 6MPHHigh Range
KG90-HUT40HUT40 (X)113mph119mph125mph
KG90-HUT30HUT30 (S)105mph110mph115mph
KG90-HUT20HUT20 (R)95mph98mph100mph
KEVLAR BALLISTIC SERIES 90g HYBRID / UTILITY MODEL#KG90-HUT

Elastically Tailored Composites
PURE KINETIC ENERGY
Wound…Round…Epic…

Wound for an explosive transfer of kinetic energy….however you drive it, KINETIXX® IMRT will optimize down range distance and target performance.

An active shaft that increases in frequency the greater the force applied.

This hard kicking, elastically tailored composite is engineered to improve club forgiveness and generate outrageous ball speed and precise shot control!

Technology/Design

Filament wound Vacuum Cured Construction technology produces round, concentric and spineless golf shafts for incomparable stability, dynamic response and feedback.
Fitting the widest array of players and swing types. Each shaft profile and flex present a visible, pre-loaded fiber architecture.Tension tailored for torsional recovery and attenuation of vibration, for the purest kinetic energy transfer from shaft to clubhead.PADERSON® KINETIXX® loaded kevlar BALLISTIC series features the worlds only continuous fiber filament wound kevlar construction technology.Optimizing the extraordinary material properties producing shafts with an incredibly high tensile strength-to-weight ratio, 5x stronger than steel, with 20x the elastic strength.

KG90-HUT is a Mid-High Balance, heavier weighted Low Kick advanced composite hybrid specific shaft that delivers balanced strength from butt to tip, producing a medium-high Ballistic shot trajectory with exceptional feel.

Installation Guidelines

Installation Guidelines PADERSON KINETIXXLOADED Shafts:

Installation should only be completed by a qualified, trained club builder.

All PADERSON KINETIXx loaded shafts are to be BUTT Cut to length.
Do not TIP trim any shaft model! Regardless of CPM, or club assembly config.
Tip preparation: light belt abrasion or hand sanding recommended prior to final assembly.
*To ensure a smooth and clean build, we perform a post-production tip preparation: 1″ Metalwoods, 1.25″ Irons. depending on hosel bore depth, there will in many assemblies be the need to lightly sand beyond the prepared surface delivered. Light belt abrasion is also recommended to insure a full shaft insert and adequate epoxy adhesion. Do not Chamfer tip section or blade prep (scratch) tip to prepare for epoxy.

Reviews

There are no reviews yet.

Be the first to review “Ballistic90 HUT”

Your email address will not be published. Required fields are marked *

10 + six =

Solve : *
27 − 3 =